I believe you must be very curious about the function of submersible mixer and the steps of installation and debugging. Now let's introduce it to you.
Installation and commissioning of submersible mixer:
1. The lubricating oil of various parts that need to be checked frequently before use is not enough. If there is insufficient lubricating oil, it should be replenished in time. In addition, the rotation direction and direction marks of the two half shafts are together. If there is no lubricating oil, it should be corrected in time.
2. Start the discharge device. The drain outlet and closure shall be accurate and in place, and the water supply system shall work normally, and the corresponding water supply time shall be adjusted according to the water proportion requirements, and then work. By reducing the transfer of fresh water, submersible mixers can reduce the amount of nutrients and other toxic pollutants in the water entering the water body, which can protect the aquatic ecosystem.
3. The submersible mixer will use the recycled water for those places with low water quality requirements, expand the water source or provide an alternative supply source to meet the current and future water demand.
